Specifications
| Diameter | |
|---|---|
| Abrasive Type | |
| Grit | |
| Grit Grade | |
| Material | |
| Attachment Type | |
| Center Hole Size | |
| Color | |
| Applicable Materials | |
| Industries | |
| Max RPM |
Includes
- (10) Silicon Carbide Quick Change Clean and Strip Discs
Features
- Removes paint, rust and coatings quickly without compromising the geometry of the workpiece
- Thin width gets into tight corners for complete cleaning, stripping, and surface prep
- Provides greater surface area than wire brushes
- Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
- Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
- Smear resistant, non-woven web material provides uniform wear over the life of the disc
Product Details
Scotch-Brite™ 4" Extra Coarse Silicon Carbide Quick Change Clean and Strip Disc (10 Pieces) by 3M®. Scotch-Brite™ Clean and Strip Disc was designed to help operators tackle tough metalworking challenges: think paint prep and coating and corrosion removal. When removing unwanted contaminants and stubborn imperfections – or smoothing a rough surface – it's a good idea to have a load-resistant, sharp-cutting abrasive on hand.
Installation
An Abrasive for High-Production Environments.
Scotch-Brite™ Clean and Strip Disc has all the benefits operators have come to expect from Scotch-Brite™ abrasives, including good load resistance and consistent cutting action. In fact, its ability to withstand debris makes it a good match for high-production environments and projects that generate a lot of dust, such as coating and corrosion removal. Scotch-Brite™ Clean and Strip Disc features a standard attachment system and may be connected to a backstand, right angle grinder or die grinder.
Silicon Carbide Mineral Cuts Sharp and Leaves a Bright Finish.
Nylon fibers on Scotch-Brite™ Clean and Strip Disc are interspersed with extra-coarse (XCS) silicon carbide mineral. 3M choses extra-coarse (XCS) mineral, because it cuts more aggressively than minerals in a finer grade. Among synthetic minerals, silicon carbide is one of the sharpest. It breaks down faster than aluminum oxide but leaves a finer finish.
The Many Benefits of Scotch Brite™ Abrasives.
As a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it's such a great match for cleaning welds, removing rust and stripping paint. The gaps between nylon fibers permit debris to escape. The benefits of this are twofold. First, it enhances the abrasive's ability to withstand loading.
As a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it's such a great match for cleaning welds, removing rust and stripping paint.
Second, because the abrasive does not get clogged with debris as easily, it has prolonged service life. The nylon fibers break down continuously during grinding, revealing fresh mineral for ongoing sharp cutting action and consistent finishes — part after part.
