Product Details
3/4" Drive 1200 ft lb Extreme Duty Industrial Grade Air Impact Wrench with 6" Extended Anvil by AIRCAT®. Also features patented ergonomically designed handle. The TWIN HAMMER Mechanism consists of 2 hammers in a closed cage which rotates around the anvil. This design allows the hammer to hit at the same time on both sides of the anvil. A twin hammer design is very durable and particularly suitable for long operating cycles. A further advantage is that the design consists of few individual parts and this makes it very easy to service. The twin hammer is lubricated by grease. Lubrication can be easily done from outside via greasing fitting without opening the housing. The TWIN-Hammer design is best used for industrial, all-around automotive applications, tire service and assembly.
Specifications
| Square Drive (in.): 3/4 |
| Air Cons. (CFM): 8 |
| Bolt Capacity (in.): 1 |
| Air Inlet (in.) NPT/BSP: 3/8 |
| Rec. Hose Size (in.): 1/2 |
| Weight (lbs.): 14.9 |
| Length (in.): 14.9 |
| Free Speed (RPM): 4,500 |
| Impacts Per Minute (IPM): 950 |
| Max. Torque (ft lb): 1,200 |
Features
- Durable hard hitting twin hammer mechanism
- 1,400 ft lb Loosening torque
- Best suited for bus, large truck, tractor, large agricultural service vehicles, mining, construction and industrial bolt assembly
- High performance motor maximizes torque output
- Patented ergonomically designed handle
- 6" Extended anvil
The AIRCAT® line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT has the patented tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise.