Product Details
3/16" to 5/8" 37° Single Manual Flaring Tool by Fragola Performance Systems®. The AN specification calls for a 37° JIC flare in order to seal hard line tubing on the flare of the matching adapter. This economical flaring tool works on 3/16" through 5/8" diameter tubing. The faceted hard chrome-finished cone rolls out a perfect flare and burnishes the surface at the same time. Large handle gives excellent leverage.
Notes
- This Flare Tool is Not Designed for use on Steel or Stainless Steel Tubing.
Specifications
| Type: Manual Flaring Tools |
| Unit of Measure: SAE |
| Flare Angle: 37° |
| Flare Type: Single Flare |
| Tube OD (SAE): 3/16", 1/4", 3/8", 1/2", 5/8" |
Features
- High quality at an affordable price
- Expertly made from premium materials
- Built to match your exact requirements
F.F. Screw Products started in 1973 as a job shop in a 1000 square foot building that was run as a part time operation with 1 employee. Within 4 years, it changed to a full time operation with 10 employees. In 1982 after years of doing job shop components for many large companies they decided to start making our own product and F-K Bearings was started. At that time they were operating both F.F. Screw Products and F.K. bearing in two separate buildings that were approximately 36,000 square feet combined. In 1999 after talking to many of their customers who kept inquiring why they didn’t manufacture fittings for the racing industry, Fragola Performance Systems® came about. They are now housed in a 80,000 square foot building with 35 employees, while their sister company F.K. Bearings is across the street from them with their own 80,000 square foot building with 55 employees.
F.F. Screw Products started in 1973 as a job shop in a 1000 square foot building that was run as a part time operation with 1 employee. Within 4 years, it changed to a full time operation with 10 employees. In 1982 after years of doing job shop components for many large companies brand decided to start making their own product and F-K Bearings was started. At that time they were operating both F.F. Screw Products and F.K. bearing in two separate buildings that were approximately 36,000 square feet combined. In 1999 after talking to many of customers who kept inquiring why they didn’t manufacture fittings for the racing industry, Fragola Performance Systems® came about. Brand is now housed in a 80,000 square foot building with 35 employees, while sister company F.K. Bearings is across the street from brand with their own 80,000 square foot building with 55 employees.