Product Details
BDB1340A Lathe with CBS-1340A Stand by JET Tools®. JET Belt Drive Bench Lathes feature an enclosed gearbox with helical cut gears for noise reduction and smooth operation. The full length splash guard on all sizes prevents hot chips and fluid from contaminating the work area and the quick change gearbox allows for fast and easy gear changes for metric threading. Each JET Lathe comes loaded with features you’ve come to expect.
Specifications
Accessories: Stand |
Carriage Travel: 35" |
Compound Slide Travel: 2-11/16" |
Cross Slide Travel: 6-5/16" |
Distance Between Centers: 40" |
Drive: Belt Drive |
Follow Rest Capacity: 2-3/4" |
Length of Gap: 8" |
Motor: 2 hp, 230 V, Single-phase |
Number of Inch Threads: 38 |
Number of Longitudinal and Cross Feed Rates: 38 |
Number of Metric Threads: 23 |
Number of Spindle Speeds: 12 |
Overall Dimensions (L x W x H): 71" x 32" x 45" |
Prewired: 230 V |
Range of Cross Feeds (IPR): .0006 - .013 |
Range of Inch Threads (TPI): 3-1/2 - 80 |
Range of Longitudinal Feeds (IPR): .0018 - .0374 |
Range of Metric Threads: .45 - 10 |
Range of Spindle Speeds: 60 - 1,240 RPM |
Size: 13" x 40" |
Spindle Bore: 1-3/8" |
Spindle Mount: D1-4 |
Spindle Taper with Sleeve: MT-5 (MT-3) |
Steady Rest Capacity: 2-5/8" |
Swing Over Bed: 13" |
Swing Over Cross Slide: 7-25/32" |
Swing Through Gap: 18-3/4" |
Tailstock Spindle Travel: 3-3/4" |
Taper in Tailstock Spindle: MT-3 |
Tool Size (Max.): 5/8" x 5/8" |
Type: Bench |
Weight: 1,175 lb |
Width of Bed: 7-3/8" |
Includes
- Oil pan
- Tolerance test certificate
- 6" 3-jaw direct mount scroll chuck with top reversing jaws
- 8" 4-jaw independent chuck
- 12" faceplate
- Four-way tool post
- Steady and follow rest
- Metric change gear
- Centers and headstock center sleeves
- Threading dial
- Tool box with tools
Features
- Image shown with optional bench, p/n 321443AK
- Enclosed gearbox design provides smooth, quiet operation
- Fast, easy speed changes
- Low voltage motor controls
- Helical cut headstock gears reudce noise
- Change gears allow metric threading
- Spindle is supported by precision tapered roller bearings
- V-way bed is induction hardened and ground
- Gap bed section provided for large diameter work
- Independent leadscrew and feed rod
- T-slotted compound slide with four-way tool post
- Carriage mounted spindle control lever
- Automatic feeding and threading are fully interlocked
- Feed selectors travel in grooved ways
JET Tools®, owned by JPW Industries, is committed to being the supplier you can depend on for the epitome of quality, innovation and Service. JET Tools has worked hard to make this a reality that has been ongoing since JET tools introduced products more than 50 years ago. With JET Tools being used by manufacturing professionals in plants, machine shops and workshops across the United States, we knew we could bring the same quality and reliability to another very important customer - You.