Product Details
15 GPM 1:1 Aluminum Air Operated Low Pressure Oil/Anti-Freeze Diaphragm Pump (85631) by Lincoln®. Diaphragm pumps are driven by compressed air. The directional air distribution valve and pilot valve-the “air end"—are located in the center section of the pump. Liquid moves through two manifolds and outer chambers of the pump-the “wet end". Generally, check valves are located at the top and bottom of each outer chamber or on a common manifold. The two outer chambers are connected by suction and discharge manifolds. Lincoln's double diaphragm self-priming design offers many advantages over other pumps.
Notes
- The pump exhaust should be piped to an area for safe disposal of product being pumped in the event of a diaphragm failure.
Specifications
Ratio: 1:1 |
Pump Body: Aluminum |
Wetted or Soft Parts: Buna-N |
Max Flow Rate: 15 GPM |
Inlet Size: 1/2" NPT |
Outlet Size: 1/2" NPT |
Air Inlet Size: 1/4" NPT(F) |
Max Inlet Air Pressure: 100 psig |
Max. Susp. Solids Diameter: 1/8" |
Liquid Type: New/usedoil, AF |
Features
- Pump abrasive and sheer-sensitive materials. Low interval velocities move abrasives easily with no damage. Gentle pumping action does not sheer fragile materials
- Pumps viscous materials. Even heavy or solids-laden materials can be pumped
- Environmentally friendly. No motors, seals or packing to leak
- Self-priming. Able to dry prime under most suction lift or flooded suction conditions
- Variable flow. Regulate the inlet air supply to adjust flow
- Runs dry without damage
- Deadheads against closed discharge. Excessive back pressure stops operation without damage until discharge opens. Eliminates bypass systems or relief valves
- Explosion-proof. Eliminates sparking concerns of other electrical or rotating pumps
Lincoln® offers superior lubrication equipment and components, heavy-duty pumping gear, and electronic controls for both industrial and automotive professionals. To provide you the highest level of quality, the company designs its products in compliance with ISO 9001 certification. Lincoln’s pumping products include the PowerMaster and PileDriver pumps designed to handle viscous materials, such as heavy lubricants, sealants, adhesives, and printing links. The company’s lubrication systems are made to direct precise amounts of oil or grease to bearings or other lubrication points. Lincoln’s systems include ORSCO - oil lubrication systems, Helios and Duo-Matic - pressurized two-line systems, Quicklub and Modular Lube - single line progressive systems, and Centro-Matic - single line injector systems.