Name: Makita® HP2010N - Corded 120 V 6.0 A Variable Speed Rear-Handle Hammer Drill
Brand: Makita
SKU: mpn4803730624
Price: 317.66 USD
Availability: OutOfStock

Product Details

Corded 120 V 6.0 A Variable Speed Rear-Handle Hammer Drill (HP2010N) by Makita®. The Makita 3/4" 2-Speed Hammer Drill has variable-speed operation to help with starting holes in concrete and steel. Start with low gear for speeds up to 900 RPM and 18,000 BPM. Then switch to high to take advantage of up to 2,300 RPM and 46,000 BPM. The 1/2" keyed chuck is powered by a 6 Amp motor and ball bearings translate to years of dependable use. This hammer drill also has adjustable side handles and a depth gauge for drop-in anchors.

Specifications

Capacities (concrete: low, high): 3/4", 1/2"

Capacities (steel: low, high): 1/2", 1/4"

Capacities (wood: low, high): 1-1/2", 3/4"

No Load Speed (var. 2 spd): 0 - 900 / 0 - 2,300 RPM

Blows Per Minute (2 speed): 0 - 18,000 / 0 - 46,000 BPM

Amperage: 6.0 A

Chuck Size: 1/2"

Overall Length: 13-3/4"

Net Weight: 6.4 lbs.

LED light: No

Power Type: Corded

Optimum Range (concrete drilling): 5/32" - 7/16"

Includes

(1) 1/2" Drill Chuck (763047-2)
(1) Chuck Key (798341-3)
(1) Side Handle (122428-3)
(1) Depth Gauge (321059-7)
(1) Tool Case (824608-4)

Features

Powerful 6 AMP motor for the most demanding applications
2-speed (0-900 & 0-2,300 RPM) with speed control switch
2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
Variable speed switch for easy starting of holes
All-ball bearing construction for longer tool life
Adjustable side handle for greater control
Depth gauge for "drop-in" type anchors
Recessed lock-on button for continuous use
Lightweight (6.4 lbs.) for reduced operator fatigue
Double insulated

Makita® applies the latest innovation to engineer and manufacture the best power tools in the world. Makita Power Tools have more power and less weight, and are more compact and more efficient than any other. At jobsites around the world, professional users are dumping the old, getting the new and gearing-up with Makita. Makita manufactures best-in-class industrial power tools for the professional user.

Brand:

Makita

Part Number:

HP2010N

UPC:

088381001328

Warranty

Makita General Product Limited Warranty

Every Makita product is warranted to be free of defects from workmanship and materials for the period of one year from the date of original purchase. Certain products referenced below have longer warranties. Should any trouble develop during the one-year period, return the complete product for inspection. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace) the product without charge.

Makita 3-Year Limited Warranty

Every Makita Pneumatic Nailer and Lithium-Ion Tool, Battery and Charger are warranted to be free of defects from workmanship and materials for the period of three years from the date of original purchase. Should any trouble develop during the three-year period, return the complete Lithium-Ion Tool, Battery, Charger or Pneumatic Nailer for inspection. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace) the product without charge.

*See below for limitations and exclusions applicable to all Makita warranties

Makita Warranty Limitations And Exclusions

These warranties do not apply to Makita Accessories or where:

Repairs have been made or attempted by others.
Repairs are required because of normal wear and tear. With regard to Pneumatic Nailers, normal wear parts include the following and are not covered under this warranty: piston/drive assemblies, piston stops, drive blades, rubber O-rings, seals, isolators, air filters, and drive belts.
The tool has been abused, misused, improperly maintained or operated. With regard to Pneumatic Nailers, improper operation includes the failure to use, clean, and dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting. With regard to Lithium-Ion Tools, improper operation includes the use of a non-genuine or “knock-off” battery on a Lithium-Ion Tool or Charger. With regard to Laser Instruments, abuse includes liquid damage or physical damage caused by impact.
Alterations have been made to the tool.

In no event shall Makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold under these warranties, or (b) any amount in excess of the amount actually paid to Makita for the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of “merchantability” and “fitness for a specific purpose” after the expiration of any express warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Makita® HP2010N - Corded 120 V 6.0 A Variable Speed Rear-Handle Hammer Drill

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!