Specifications
| Tape Length | |
|---|---|
| Tape Width | |
| Tape Color | |
| Material |
Features
- Apply to fixed or moving parts
- Offset adhesive keeps adhesive away from the paint edge
- Semi-split design conforms easily to most apertures without rolling to ensure a smooth paint edge
- Continuous roll that does not distort when torn
Product Details
164' x 0.51" White Masking Tape by Norton®. Norton Foam Masking Tape is an easy-to-use, time-saving product to mask door jambs and other apertures like hood and deck lid openings that need to be sealed during the painting process. Produces a soft edge, rather than a hard paint line, so rework is eliminated and productivity is increased.
FOR REMOVAL: Lift one end of the foam about an inch from the surface then stretch the foam tape parallel to the surface to ensure clean removal. (Do not remove foam at a 90 degree angle as this may cause adhesive transfer).
Instructions
- Apply to the car body / fixed part being careful not to expose the adhesive where paint will be applied. Press evenly and firmly for good adhesion
- Close the moving part very carefully and then do a visual check to make sure there is no exposed adhesive
- After painting the vehicle and the paint is dry, the foam masking tape can then be removed