Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Center hole: 15/16"
- X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
- Enhanced mulching for bagging and discharge efficiency
- Stays sharp and durable
- Replacement for major brand: Toro
Product Details
16-1/4" Lawn Mower Blade (92-026) by Oregon Tool®. The Oregon™ 92-026 lawn mower blade is created to provide consistency and longevity, while delivering a cleaner cut and quality results. Requires 3 lawn mower blade for 48" cut.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Exmark: LZE20KA484, LZE22KA484, LZE600GKA484A2, LZE600KA484, LZE651GKA484A2, LZS22KA484, LZS22KA484CA, LZS651CKA484A2, LZS651KA484, LZS651KA484CA, LZX23KC486, LZX680KC486, Lazer Z AS, Lazer Z CT, Lazer Z HP, Metro HP, Next Lazer ASX, Next Lazer Z Air Cooled, PNE651GKA48200, PNE710GKC48200, PNS22KA483, PNS651KA483, PNS710GKC48300, PNS710GKC483A4, PNS710KC483, RAE708GEM48300, RAE720CKC48300, RAS710CKC48300, RAX651GKA484A3, TTS16KA483, TTS16KA483CA, TTS20KAE483, TTS20KAE483CA, TTS20PKAE483, TTS481GKA48300, TTS481KA483, TTS541CKA48300, TTS541KA483CA, TTS600GKA483E0, TTS600KAE483, TTS600PKAE483, TTS680PKC48300, TTS680PKC483E0, TTS680PKCE483, Turf Tracer HP, VT20KA484, VT24KA484, VT24KA484CA, VT651KA484, VT691KA484CA, VTS651KA484, VTS651KA484CA, VTS691CKA48400, VTS691KA484CA, VTX651GKA48400, VTX651KA484, Vantage
Toro: Titan
Replacement Guide
Exmark: 103-6381, 103-6381-S, 103-6391, 103-6391-S, 103-6396, 103-6396-S, 103-6401, 103-6401-S, 116-5177, 116-5177-S
Mowmore: EX11240
Rotary: 11240
Sunbelt: B1EM1890
Toro: 109-6872