Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Center hole: 5/8"
- Enhanced mulching for bagging and discharge efficiency
- Stays sharp and durable
- Requires 3 blades for a 50" cut
- Fits Toro Models: TimeCutter Z(5000,5020,5030,5040,5060)
Product Details
17-1/2" Lawn Mower Blade (94-063) by Oregon Tool®. The Oregon™ 94-063 replacement lawn mower blade is made to the exact OEM specification for optimum performance. Oregon Tool blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Toro: 117-5310, 74391, 74398, 74399, 74630, 74631, 74632, 74635, 74637, 74638, 74641, 79016, 79312, TimeCutter Z5000, TimeCutter Z5020, TimeCutter Z5030, TimeCutter Z5035, TimeCutter Z5040, TimeCutter Z5060
Replacement Guide
Stens: 350-219
Toro: 110-6837-03, 112-9759, 112-9759-03, 115-5059, 115-5059-03, 57-0250