Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Center hole: 15/16"
- Requires 3 blades for 60" cut
- The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge
- Stays sharp and durable
- Replacement for major brand: Exmark
Product Details
20-1/2" Lawn Mower Blade (92-209) by Oregon Tool®. You can count on the Oregon™ 92-209 replacement lawn mower blade to be the best in the industry. Oregon Tool 26 quality standards ensure that you're buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Exmark: LZE730GKA604A3, LZE730GKA604B3, LZE730GKA60RA1, LZE730KA604, LZE740EKC60400, LZE740EKC604A3, LZE742GKC60400, LZE742GKC60403, LZE742GKC604A3, LZE742GKC604B1, LZE751CKA604A1, LZE751GKA604A1, LZE751GKA604C1, LZE751GKA60RA1, LZE801GKA604A3, LZE801GKA604B1, LZE801GKA60RA1, LZS740PKC60400, LZS742CKC60400, LZS749AKC604A1, LZS749EKC60400, LZS749EKC604A1, LZS801GKA60400, LZS801GKA604A1, LZS902DKU60R00, LZX940EKC60RT0, PNS740GKC60RA3, RAS740GKC60R00
Replacement Guide
Encore: 543294
Exmark: 103-6383, 103-6383-S, 103-6388, 103-6388-S, 103-6393, 103-6393-S, 103-6398, 103-6398-S, 103-6403, 103-6403-S, 116-5174, 116-5174-S, 116-8181, 116-8181-S, 116-8196, 116-8196-S