Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Requires 3 for 60" cut
- High-lift: Aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge
- Turbo Force Deck
- Major brand replacement: Toro
- Replace OEM No. 105-7718, 105-7718-03, 108-1114
Product Details
20-1/2" Lawn Mower Blade (94-055) by Oregon Tool®. The Oregon™ 94-055 replacement lawn mower blade is made to the exact OEM specification for optimum performance. Oregon Tool blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Hustler: Super Z, XR-7, Z
Toro: 112-5006, 127-1619, 127-1636, 127-1639, 127-1642, 127-1644, 30280, 74238, 74238CP, 74244, 74245, 74246, 74246TE, 74249, 74250, 74251, 74253, 74253CP, 74255, 74262, 74262CP, 74262TE, 74265, 74265TE, 74267, 74267CP, 74268, 74268CP, 74268TE, 74272, 74272CP, 74283, 74292, 74296, 74513, 74523, 74550, 74551, 74553, 74576, 74583, 74915, 74915CP, 74925, 74926, 74930, 74933, 74935, 74946, 74950, 74958, 74960, 75936, 75951, 75967
Replacement Guide
Dixie Chopper: 30227-60, 30227-60E, 30227-60H, 30227-60T, 30227-60V, 30227-60X, A30227-60N
Dixon: 12421, 12451, 12508, 13368, 13869, 13870, 13921, 13922, 13956, 13957, 13958, 13960, 539119871, 9383
Hustler: 600901, 602771, 602771X, 603992, 603992X, 793794, 793794X, 793794Y, 793935, 793935X, 794214, 794214X, 794230, 794230X, 794230Y, 794685, 794685X
Jacobsen: 30227-60X
Toro: 105-7715, 105-7715-03, 105-7716, 105-7716-03, 105-7718, 105-7718-03, 105-7777, 105-7777-03, 105-8777, 105-8777-03, 106-8777, 108-1114, 108-1115, 108-112, 108-1123, 108-1128, 110-0405, 112947, 125-9329-01