Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Center Hole: 5/8"
- Enhanced mulching for bagging and discharge efficiency
- Stays sharp and durable
- Major brand replacement: Ferris
- Requires 3 blades for 72" cut
Product Details
24-1/2" Lawn Mower Blade (92-035) by Oregon Tool®. The Oregon™ 92-035 lawn mower blade is created to provide consistency and longevity, while delivering a cleaner cut and quality results. 3 lawn mower blades are required for a 72" cut.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Toro: 112-5007, 127-1640, 127-1643, 127-1645, 74247, 74252, 74254, 74254CP, 74256, 74263, 74263CP, 74269, 74269CP, 74273, 74273CP, 74274, 74274CP, 74284, 74297, 74916, 74918, 74927, 74928, 74934, 74937, 74938, 74940, 74947, 74957CP, 74959, 74961, 74961CP, 74967CP, 74977, 74979, 75968, 78928
Replacement Guide
Dixon: 12339, 12452, 12509, 13871, 13923, 13961, 13962, 13963, 13998, 539118957, 539119802, 539119841, 539119876, 539119877, 539119909
Ferris: 48112, 48113, 481709
Hustler: 602857, 602857X, 798702, 798702X, 798710, 798710X, 798728, 798728X
Jacobsen: 3970261
Scag: 48112, 481709, 482788, 482882
Toro: 105-7711, 105-7711-03, 105-7712, 105-7712-03, 105-7719, 105-7719-03, 105-7778, 105-7778-03, 105-7784, 105-7784-03, 108-1120, 108-1126, 110-0404, 110-0410, 110-0411, 110-0622-03