Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Outer Hole Diameter | |
| Center Hole Size | |
| Center-to-Center | |
| OffSet | |
| Air Lift | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Center hole: 1"
- Requires 2 blades for 48" cut and 3 blades for a 72" cut
- Enhanced mulching for bagging and discharge efficiency
- Stays sharp and durable for longer
- Replacement for major brand: John Deere grooming mowers
Product Details
24-15/16" Lawn Mower Blade (91-585) by Oregon Tool®. You can count on the Oregon™ 91-585 replacement lawn mower blade to be the best in the industry. Oregon Tool 26 quality standards ensure that you're buying a sharp, high-performance blade that mounts properly. It delivers a cleaner cut for quality results.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Outer Hole Diameter - This is the diameter of any holes to the sides of the center hole.
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
Center-to-Center - If there are outer holes; this is the distance between the centers of those outer holes.
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Woods: PRD7200, RD72, RD7200, RD7200-2
Replacement Guide
John Deere: 5WP1001511K2, 5WP100511KT, 5WP1008199K2, 5WP1008199KT
Stens: 345-085
Woods: 10081899KT2, 1008199, 1008199KT, 1008199KT2