Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Gator Blade Series | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Center hole: 5/8"
- Tungsten carbide is "fused" into the blade - creating an ultra-hard layer at the cutting edge and increasing the time between sharpening
- X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
- Gator Mulcher™ provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle
- The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge
- Replacement for major brand: Dixon
Product Details
Gator™ G5™ 16-1/2" Blade (596-308) by Oregon Tool®. Move through work quickly with the Oregon ™ Gator™ G5™ 596-308, a blade that sets the industry standard. The Gator™ G5™ stands up to any workload with an improved cutting performance, which stays sharper and stronger longer than the standard manufacturer blade. It's not a replacement blade. It's an upgrade.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Replacement Guide
Bunton-Goodall: PL4205
DR: 152871
Dixon: 11645, 539100340
Gravely: GDU10230
Great Dane: D18086, GDU10230
Hustler: 601014, 601014X, 601123, 601123X, 601123Y, 795757, 795757X, 795757Y, 796623, 796623X, 796623Y, 796631, 796631X, 796631Y, 796649, 796649X, 796649Y
John Deere: AM104489, M73509, PT11136, TCU29299, TCU35392, TCU37209
Land Pride: 839-157C, 839-270C
Lesco: 21871, 5011, 50111
Scag: 48110, 481706, 481710, 48184, 482461, 482877
Snapper: 17043, 7017043, 7017043YP, 7075771, 7075771BMA, 7075771BZ, 7075771BZYP
Toro: 107-3192, 107-3192-03, 107-3193, 107-3193-03, 107-3194, 107-3194-03, 107-3195, 107-3195-03, 107-3196, 107-3196-03, 110-0415, 110-0416, 110-0417
Wright Stander: 71440002, 71490001