Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Gator Blade Series | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Fused with carbide for added tough cutting exterior
- Superior mulching and bagging with blade angle to increase air flow
- Extended cutting length
- Major brand replacement: AYP
Product Details
Gator™ G5™ 18-7/16" Blade (595-605) by Oregon Tool®. Move through work quickly with the Oregon ™ Gator™ G5™ 595-605, a blade that sets the industry standard. The Gator™ G5™ stands up to any workload with an improved cutting performance, which stays sharper and stronger longer than the standard manufacturer blade. It's not a replacement blade. It's an upgrade.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Ariens: 936040, 936043, 936054, 936055, 936059, 936068, 936069, 936078, 936096, 936097
Replacement Guide
Ariens: 21546235, 21546848
Craftsman: 187255, 187256
Dixon: 532187756
Husqvarna: 112053, 187254, 187255, 187256, 24541, 33954, 532187254, 532187255, 532187256, 539112053, 574292401, 575938401, 575938501, 777187256, 917187254, 917532187254, 917532187255, 917532187256, 917539112053, 917777187256
Husqvarna/AYP: 112053, 187254, 187255, 187256, 24541, 33954, 532187254, 532187255, 532187256, 539112053, 574292401, 575938401, 575938501, 777187256, 917187254, 917532187254, 917532187255, 917532187256, 917539112053, 917777187256
Murray: 187256
Poulan: 187254, 187255, 532187255, 532187256, 539112053, 574292401, 575938401, 575938501, 582923101, 777187256