Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Gator Blade Series | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Fused with carbide for added tough cutting exterior
- Superior mulching and bagging with blade angle to increase air flow
- Extended cutting length
- Major brand replacement: SCAG
Product Details
Gator™ G5™ 18" Blade (596-344) by Oregon Tool®. Move through work quickly with the Oregon ™ Gator™ G5™ 596-344, a blade that sets the industry standard. The Gator™ G5™ stands up to any workload with an improved cutting performance, which stays sharper and stronger longer than the standard manufacturer blade. It's not a replacement blade. It's an upgrade.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Replacement Guide
Bobcat: 32022, 32022A, 32022HD, WM132022
Bunton-Goodall: PL4206
DR: 225381
Dixon: 10715, 11633, 539100341, 539105712
Encore: 363291, 481707, 482462
Exmark: 1-303146, 1-303283, 1-303495, 1-303527, 1-633482, 1-633484, 1-633485, 103-1578, 103-1578-S, 103-2508, 103-2508-S, 103-2518, 103-2528, 103-6337-S, 103-6580, 103-6580-S, 103-6582, 103-6582-B, 103-6582-M, 103-6582-S, 103-6584, 103-6584-B, 103-6584-M, 103-6584-S, 116-5176-S, 303283, 303527, 633482, 633484, 633485, E633482, E633485
Ferris: 21227S, 481711, 5021227, 5021227S, 5021227X2, 5101756S, 5101756X2, 5103304S, 5103304X2, A48185
Giant Vac: 21536, 3021536
Great Dane: D18037, GDU10231
Husqvarna: 100341, 101485, 539100341, 539101485, 539105712
Jacobsen: 363055, 390665
John Deere: AM104490, PT8721, TCU29188, TCU29869, TCU35393, TCU37208
Kees: 100341, 101485, 363055
Lastec: 027048
Lesco: 50125, 50140
Scag: 48108, 481707, 481711, 48185, 482462, 482878, 482961
Simplicity: 1756152AYP, 1756152SYP, 5101756S, 5101756SYP, 5103304SYP, A48185
Snapper: 17037, 1756152SYP, 5101756S, 5101756SYP, 5101756X2, 5103304S, 5103304SYP, 5103304X2, 7017037, 7075751, 7075751BMA, 7075751BZ, 7075751BZYP, 7076450, 7077344, 76450, 77344
Wright Stander: 71440001