Specifications
| Blade Width | |
|---|---|
| Thickness | |
| Blade Length | |
| Center Hole Size | |
| OffSet | |
| Air Lift | |
| Gator Blade Series | |
| Color | |
| Volume | |
| Product UOM | |
| Weight (with Packaging) | |
| Product Height | |
| Product Length | |
| Product Width |
Features
- Center hole: 15/16"
- Tungsten carbide is "fused" into the blade - creating an ultra-hard layer at the cutting edge and increasing the time between sharpening
- X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
- Gator Mulcher™ provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle
- The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge
- Replacement for major brand: Encore
Product Details
Gator™ G5™ 20-1/2" Blade (596-749) by Oregon Tool®. Move through work quickly with the Oregon ™ Gator™ G5™ 596-749, a blade that sets the industry standard. The Gator™ G5™ stands up to any workload with an improved cutting performance, which stays sharper and stronger longer than the standard manufacturer blade. It's not a replacement blade. It's an upgrade.
Blade Width - Measure near the center of the blade.
Thickness - Measure near the center of the blade.
Blade Length - Measured diagonally from the corners of the blade
Center Hole Size - Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD™ built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut
OffSet - (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table
Air Lift - Air lift is the distance the lift panel rises above the cutting edge.
Fit Guide
Replacement Guide
Encore: 543294
Exmark: 103-6383, 103-6383-S, 103-6388, 103-6388-S, 103-6393, 103-6393-S, 103-6398, 103-6398-S, 103-6403, 103-6403-S, 116-5174, 116-5174-S, 116-8181-S, 116-8196, 116-8196-S