Product Details
SR-2024M 24" Slip Roll by Wilton®. JET manual slip rolls have a forming width of 24”, 36” & 50” with a capacity of 20, 22 & 16 gauge mild steel. These machines have two driven rolls of precision turned, ground and polished carbon steel. They are the perfect sheet metal forming machines to have in any general fabrication, school, racing or HVAC shop. The highly rigid construction frame ensures precision roll bending for decades of production. This sheet metal roller comes standard with three wire or rod grooves.
Specifications
Capacity: 20 Gauge Mild Steel |
Minimum Forming Radius: 1" |
Overall Dimensions (L x W x H): 50" x 14" x 14" |
Throat Depth: 24" |
Weight: 216 lb |
Features
- Large roll adjusting screws facilitate lifting upper roll for easy material removal
- Perfect tool for sheet metal forming in HVAC and FAB-shops
- Precision turned carbon steel rolls that are ground and polished
- Suitable for many industrial, educational and vocational shop uses
- Wire grooves are standard
The legend of Wilton® begins in 1941, when Hugh W. Vogl, a Czech immigrant, founded the vise manufacturing company naming it after the cross street where the original company building was located: Wilton Avenue and Wrightwood Avenue in Chicago, IL
Hugh Vogl designed a 4” vise with a unique patented bullet design known at the time as the 40S Machinist Vise. The fine threaded spindle accurately fit in a horizontal anchored, unbreakable malleable nut. This created an even, central pull, which eliminated dead motion and unnatural strain on the nut. The thread on this vise was completely enclosed keeping it clean from contaminates and well lubricated for years of smooth operation. The steel key built into the base of the main body guides the movable jaw in a precisely broached keyway which is machined to .002” tolerances which eliminates wear and preventing side twist regardless of pressure exerted.