Product Details
SAE-300™ MP 350 A MIG/TIG/Stick Engine Driven Welder by Lincoln Electric®. Quality and efficiency on the pipeline. When it comes to pipeline construction and maintenance, you deal with more unpredictable variables than you'd care to count. Adverse weather, natural terrain and regulatory requirements are just a few. Given the natural and man-made uncertainties often associated with your business, you need equipment you can count on to maximize quality and efficiency, minimize repair time and control costs.
Specifications
| Welding Process: MIG (GMAW), Flux-Core (FCAW), TIG (GTAW), Stick (SMAW), Gouging |
| Rated Output: 300 A DC/32 V/60%. 250 A DC/30 V/100% |
| Output Range: 40-350 A DC Welding Continuous Control |
| Generator Output: 3000 W continious |
| Type of Engine: Perkins™ 403F-15T Diesel EPA TIER 4 |
| HP and speed: 24.7 hp @ 1800 RPM |
| Cylinders: 3 |
| Dimensions: 37.1 in x 24.3 in x 62.8 in (943 mm x 616 mm x 1594 mm) |
| Net Weight: 1419 lb (643.66 kg) |
| Portability: Self-Stand |
Features
- Stability, control, endurance
- DC From the Start
- Dual Current Control
- Built For the Long Shift
The SAE-300™ MP multi-process engine-driven welder responds to the numerous challenges that are a fact of life in pipe welding operations. For example, the welder features Temperature Stabilization™, enabling you to ""set it and forget it"" by eliminating any need for adjustments based on ambient conditions or warm-up period.
With a standard built-in CV output contactor, this engine-driven welder eliminates the need for a separate wire feeder module and the downtime associated with installing it. Additionally, the OCV Boost function can be used to aid starting and low A erage welding. And, a standard on-board block heater is ready to pre-heat the engine for use in cold environments.
Some variables will always be beyond your control, but quality, efficiency and performance should always be within reach – no matter how long the pipeline or how challenging the job. Eliminate the unpredictable with an engine-driven welder that gives you consistent power and maximum control.
DC From the Start
The SAE-300 MP is powered by a hand-built pure DC generator from the only welding manufacturer providing this proven technology to the market. The all-copper windings and flat DC output ensure a smooth, stable arc that enhances arc control, helping operators keep defects to a minimum to avoid cutouts and costly repairs.
Dual Current Control
No two pipe joints are the same – hi-lo fit-up, out-of-round pipe and gap variations can challenge any bead hand to lay in a defect-free weld subject to 100% x-ray inspection. Getting those results requires tremendous control over the arc. The SAE-300 MP is equipped with dual continuous current control – use the coarse control to set a digging, penetrating arc for root beads or a soft, buttery arc for stacking iron on the fill and cap passes. Then you, or your helper using a remote control, can dial in the fine control to adjust heat input, or arc sensitivity, in response to fit-up and orientation of the weld puddle on the pipe.
Built For the Long Shift
Pipelines are all about mileage – and in many cases, a lot of it – so you need an engine-driven welder that will go farther without having to stop for refueling. 16 gallon (60.6 L) tank is almost 50% larger than the competitor's 11 gallons (41.6 L) counterpart, which translates to longer run times, improved efficiency and greater cost savings. The new heavy-duty stainless steel case and rugged wired or wireless remotes add to the durability and utility of these welders.
Day after day, year after year and decade after decade, pure DC generator machines like the SAE-300 MP have been proven to take the abuse of field welding with the lowest maintenance costs and best resale value among diesel-driven welders.
That's what you call a true workhorse.
Lincoln Electric® is the world leader in the design and development of arc welding products, robotic arc welding systems, plasma and oxy-fuel cutting equipment. For over a century, the company has taken a leading position in the brazing and soldering alloys market, providing the most innovative welding solutions. Lincoln Electric products are popular among both professional and DIY welders thanks to their reliability, ease of use, and versatility. The company also offers its work wear line that includes both durable and stylish helmets, glasses, gloves, face shields, etc. to ensure maximum protection to the welder. With such a commitment to providing the highest-quality and most innovative welding, it's easy to understand why Lincoln Electric is the first welding organization in the world to qualify for ISO 50001 certification and one of two companies to receive the “E-Star” Award more than once.